One For All Trouble Shooting GuideProblem: Solution: Red light not blinking when you Replace the batteries with press a key? new AAA alkaline batteries. The red light blinks when you press Make sure you are aiming a key but you receive no response your URC at your home from your home entertainment component? entertainment component and that you are within 15 feet of the component you are trying to operate. The URC does not operate your home Try all of the codes listed entertainment components or is not for your brand of home performing commands properly? entertainment equipment in the "Set-Up Codes" section. Some set-up codes may allow for partial functionality, however, only one set-up code will operate your home entertainment equipment correctly. Make certain that the component you are trying to operate is made to work with an infrared remote control. Problems programming a TV/VCR combo? Use the VCR set-up codes for your brand of TV/VCR combo. Some combo units require both a TV code to control volume, and a VCR code to control power and the vcr's functions. VCR is not recording? As a safety feature on the One For All remotes, you must press the REC (record) key twice. No volume in the Cable mode Try the "Volume Punch Thru" or for a 2nd TV/VCR combo. instructions in your manual, or at the programming section of our www site. Channel Up and Down not working Due to RCA design ('83-'87), for your RCA TV? only the original remote will do Channel Up and Down. Still experiencing problems? E-mail your question to: help@ueic.com |
All Material Copyright ® Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc. Any questions about the products should be directed to help@ueic.com |